Smart Salon · AI + IoT · Pilot
Smart Salon: see every chair live, from your own cameras
A small device in your salon watches the chairs through your camera and marks each one busy or free. The app updates by itself. Only that status leaves the salon, never a photo.
How it works

- Capture: your existing CCTV or IP camera (RTSP), a Raspberry Pi camera or even a phone looks at the chair area.
- Detect on the device: a Raspberry Pi 5 in the salon runs the AI. It looks for a person in each chair's box and marks the chair busy, free or unknown, confirming over a few frames before it changes.
- Send only the status: a few bytes ("Chair 2, busy, 18:21") go over HTTPS to the MLG Smart Salon cloud on Microsoft Azure. If the internet drops, the device keeps a queue and sends later.
- Update live: the owner's Chair Monitor and the Seat Board change by themselves, with no staff tapping.
- Insights: customers see free seats and the expected wait; the owner sees chair use through the day and a daily check of sittings against bills.
What the owner sees

- Occupied now and free chairs, with how long each chair has been busy or free.
- Utilization for the day, number of sittings and the average sitting time.
- Today's timeline: when each chair was in use, hour by hour.
- Short sits (a customer who sat for a minute) are shown but not counted, so numbers stay honest.
- Daily check against bills: counted sittings next to services billed, to spot work that was not billed.
- Camera health: each camera shows online, or offline since when. A camera problem shows unknown, never a wrong "free".
What your customers see
Customers see your salon's free seats and the expected wait in the customer app before they leave home, without your staff updating anything.
Privacy first, by design
- No photo or video ever leaves the salon. The AI runs on the device; only busy, free or unknown is sent.
- No face recognition and no identifying people. It knows where a person is, never who.
- Who was served, and by whom, comes only from the bill, never from the camera.
- An empty-chair reference picture, used to compare, stays on the device.
Read more on data and security.
Hardware for one salon
| Part | Typical choice |
|---|---|
| Edge device | Raspberry Pi 5, 8 GB |
| Camera | Your existing CCTV / IP camera (RTSP), or a Raspberry Pi Camera Module 3 |
| Power | 27 W USB-C power supply |
| Storage | 64 GB microSD (A2) |
| Case | Case with active cooling |
One device can watch several chairs, and more than one camera. We set up the device, draw one box per chair in Camera setup, and run a sit-and-stand test with you.
Pilot terms
Smart Salon is in a pilot with first salons. Hardware and installation are quoted separately for each salon (see pricing). We do not publish an accuracy figure until it has been measured in real salons. Without a camera, the same live seats work with the manual Seat Board.
Frequently asked questions
Can I use my existing CCTV camera?
Usually yes, if it gives an RTSP video stream on your salon network and can see the chairs. We check it in the demo.
Does it record my customers?
No. The device does not save or send video. Only busy, free or unknown leaves the salon.
What if the camera cannot see a chair?
The chair shows unknown, never free, and the owner sees that the camera needs a look.
How do I join the pilot?
Request a demo and tell us how many chairs and cameras you have.
{{related: /features/seat-board/, /features/customer-app/, /security/}}
See it working in your salon
A free demo on your phone, with your own services and prices. We set it up for you.